Bridge sawing machines

FPsa350 is a new conception machine for marble, granite and stone slab sawing. Its structure is made of stabilized steel in order to avoid any possible deformations . It is supplied equipped either with a slide for the blade descent or with an hydraulic tilting bench which can be manually rotated.
On customer’s specific demand, it is possible to install a fifth axle which enables the bench to automatically rotate , thanks to a self-braking reducer.
Both slide and carriage slide on central lubrication ball-bearing rails, checked by the control panel.
Carters are made of stainless steel.
The bridge accurate positioning is controlled by an encoder and a last generation vectorial inverter .
FPevoG peculiarity lays in its motorized head which can perform 0° to 90° cuttings , being equipped with an 825 mm max diameter blade.

  • OVERALL DIMENSIONS : 6000 x 5500 x 2450 mm
  • WORKING BENCH SIZES: 3500 x 1800 mm
  • BLADE CROSS-CUTTING STROKE: 3500 mm
  • MAX VERTICAL BLADE STROKE: 400 mm
  • MAX BRIDGE TRASLATION: 3500 mm
  • MAX WATER CONSUMPTION:max.50 lt/min
  • MAX  BLADE DIAMETER: 725 mm
  • MAX CUTTING DEPTH WITH LARGEST BLADE: 230 mm
  • BLADE HOLE DIAMETER: 50 mm
  • DIAMETER OF BLADE CLAMPING FLANGES: 250 mm
  • SPINDLE ROTATION SPEED: 1450 RPM ( 500 to 1900 RPM with inverter)
  • FEED AND BACK  SPEED OF BLADE: 0 - 35 mt/min
  • SELF-BRAKING SLIDE ENGINE: 1 x 0,55 Kw    adjustable
  • TRUCK  ENGINE: 1 x 1,8-2,2 Kw adjustable speed
  • BRIDGE ENGINE: adjustable speed
  • BLADE ENGINE: 1 x 15 Kw adjustable speed
  • REVOLVING BLADE ENGINE: none
  • BENCH  ENGINE (OPTIONAL): 1 x 1 Kw adjustable speed
  • GREASE PUMP ENGINE: 1 x 0,25 recycling guide lubrication
  • FEEDING WATER PRESSURE: 1 bar
  • FEEDING AIR  PRESSURE: 8 bars
  • FULL INSTALLED POWER: 26Kw 380V 50Hz
  • WEIGHT: KG 4550 approx

FPevoF is a new conception machine for marble, granite and stone slab sawing. Its structure is made of stabilized steel in order to avoid any possible deformations . It is supplied equipped either with a slide for the blade descent or with an hydraulic tilting bench which can be manually rotated.
On customer’s specific demand, it is possible to install a fifth axle which enables the bench to automatically rotate , thanks to a self-braking reducer.
Both slide and carriage slide on central lubrication ball-bearing rails, checked by the control panel.
Carters are made of stainless steel.
The bridge accurate positioning is controlled by an encoder and a last generation vectorial inverter .
FPevoG peculiarity lays in its motorized head which can perform 0° to 90° cuttings , being equipped with an 825 mm max diameter blade.

  • OVERALL DIMENSIONS : 6000 x 5500 x 2800 mm
  • WORKING BENCH SIZES: 3500 x 1800 mm
  • BLADE CROSS-CUTTING STROKE: 3500 mm
  • MAX VERTICAL BLADE STROKE: 450 mm
  • MAX BRIDGE TRASLATION: 3500 mm
  • MAX WATER CONSUMPTION: max.50 lt/min
  • MAX  BLADE DIAMETER: 825mm - 1200mm a richiesta
  • MAX CUTTING DEPTH WITH LARGEST BLADE: 280mm - 460mm per disco diam 1200 mm
  • BLADE HOLE DIAMETER: 50 - 60 mm
  • DIAMETER OF BLADE CLAMPING FLANGES: 250 mm
  • SPINDLE ROTATION SPEED: 1450 RPM
  • FEED AND BACK  SPEED OF BLADE: 0 - 35 mt/min
  • SELF-BRAKING SLIDE ENGINE: 1 x 0,55 Kw    regolabile
  • TRUCK  ENGINE: 1 x 1,8-2,2 Kw velocità regolabile
  • BRIDGE ENGINE: 1 x 0.37 Kw velocità regolabile
  • BLADE ENGINE: 1 x 15(20) Kw velocità regolabile
  • REVOLVING BLADE ENGINE: non presente
  • BENCH  ENGINE (OPTIONAL): 1 x 1 Kw  velocità regolabile
  • GREASE PUMP ENGINE: 1 x 0,25 Kw lubrificazione guide a ricircolo
  • FEEDING WATER PRESSURE: 1 bar
  • FEEDING AIR  PRESSURE: 8 bars
  • FULL INSTALLED POWER: 26 Kw 380V 50Hz
  • WEIGHT: KG 4850 approssimativi

FPevoG is a new conception machine for marble, granite and stone slab sawing. Its structure is made of stabilized steel in order to avoid any possible deformations . It is supplied equipped either with a slide for the blade descent or with an hydraulic tilting bench which can be manually rotated.
On customer’s specific demand, it is possible to install a fifth axle which enables the bench to automatically rotate , thanks to a self-braking reducer.
Both slide and carriage slide on central lubrication ball-bearing rails, checked by the control panel.
Carters are made of stainless steel.
The bridge accurate positioning is controlled by an encoder and a last generation vectorial inverter .
FPevoG peculiarity lays in its motorized head which can perform 0° to 90° cuttings , being equipped with an 825 mm max diameter blade.

 

  • OVERALL DIMENSIONS : 6000 x 5500 x 3000 mm
  • WORKING BENCH SIZES: 3500 x 1800 mm
  • BLADE CROSS-CUTTING STROKE: 3500 mm
  • MAX VERTICAL BLADE STROKE: 450 mm
  • MAX BRIDGE TRASLATION: 3500 mm
  • MAX WATER CONSUMPTION: max.50 lt/min
  • MAX  BLADE DIAMETER: 825mm - 1200mm a richiesta
  • MAX CUTTING DEPTH WITH LARGEST BLADE: 280mm - 460mm per disco diam 1200 mm
  • BLADE HOLE DIAMETER: 50 - 60 mm
  • DIAMETER OF BLADE CLAMPING FLANGES: 250 mm
  • SPINDLE ROTATION SPEED: 1450 RPM
  • FEED AND BACK  SPEED OF BLADE: 0 - 35 mt/min
  • SELF-BRAKING SLIDE ENGINEE: 1 x 0,55 Kw    regolabile
  • TRUCK  ENGINE: 1 x 1,8-2,2 Kw velocità regolabile
  • BRIDGE ENGINE: 1 x 0.37 Kw velocità regolabile
  • BLADE ENGINE: 1 x 15(20) Kw velocità regolabile
  • REVOLVING BLADE ENGINE: 1 x 1,1 Kw Autofrenante
  • BENCH  ENGINE (OPTIONAL): 1 x 1 Kw  velocità regolabile
  • GREASE PUMP ENGINE: 1 x 0,25 Kw lubrificazione guide a ricircolo
  • FEEDING WATER PRESSURE: 1 bar
  • FEEDING AIR  PRESSURE: 8 bars
  • FULL INSTALLED POWER: 26 Kw 380V 50Hz
  • WEIGHT: KG 5250 approssimativi